JET GARDEN 120

The Jet Garden 120 is a plastic self-priming pump. It is a relatively small pump which is mainly used in the hobby segment. The Jet Garden 120 is able, under ideal conditions, to suck up water up to 7 metres and to handle air bubbles.

The Jet Garden 120 has a maximum pressure of approx. 4.4 bar and a maximum capacity of approx. 3 m³/h. In combination with its self-priming capacity, this makes it ideal as a sprinkler pump for smaller private gardens.

The pump is equipped as standard with an on/off switch, cable with plug and a handy handle, which also makes it ideal for easy transport.

Clean water
Hobby

TECHNICAL SPECIFICATIONS

The pumps can pump clean water with a maximum medium temperature of 70 °C. Partly due to this temperature, the pump makes it possible to pump liquids with a higher temperature.

Kin Pumps jet pumps are available in 3 designs, the CMD (stainless steel), TCH (synthetic) and the HRD (cast iron). They have a maximum capacity of 90 l/min (5.4 m³/h) and a maximum pressure of 32 mwk (3.2 bar) and 44 mwk (4.4 bar) respectively.

The largest version, the Multirain Jet 5, delivers even up to 100 l/min (6 m³/h) and a maximum pressure of 54 mwk (5.4 bar). The Multirain jet pumps are made entirely of corrosion-resistant materials and are part of the multi-stage pump segment.

Download tech sheet

TECHNICAL FEATURES

Pump

Material:

Shaft seal:

Impeller Type:

Connection:

Max. liquid temperature:

Protection class:

Weight:

Plastic

Mechanical seal, Car/Cer/NBR

Closed

1" female thread

35 °C

IP55

± 6,5 kg

Incl. on/off switch

Engine

Voltage:

Power:

Maximum current:

Speed:

Cable length:

Isolation class:

Capacitor:

230 v, 50 Hz

1,0 kW

6,2 A

2900 rpm

1,5 m

F

30 µF / 450V

Built-in automatic thermal protection (single-phase only)

Suitable for continuous use

BKL 1.0 M/VV

The BKL 1.0 M/VV is a compact, robust waste water pump with a vortex impeller and special float switch, ideal for shipping, agriculture, and industry.

Check it out

Become a Dealer of kin pumps

Would you, as a supplier, like to develop a new brand within the pump sector together with Kin Pumps? Then we would like to get in touch with you to discuss our cooperation.

Contact us